Saturday, December 19, 2009

Xof1 Photo Artifacts 9: Xof1 solar array encapsulation

The Xof1 Solar Car array getting encapsulated in 2004. To make the solar array durable, it is coated in an optically clear resin. Many coats are required to make something like 1/16th of an inch coating. The resin got a bit thick part way through the day and we had to go find a jug of xylene on a Saturday. Some local paint shop had an ancient can in the back room.

Thursday, December 17, 2009

Xof1 Photo Artifacts 8: Xof1 array encapsulation prep

The solar car's array needs to be encapsulated in a near optically clear resin coating. Here the car is at a body shop in the beaches one saturday morning. Marcelo and an auto body technician are masking the array. This was a nail biting day since all the months invested in building the array and wiring all 900 cells together will be entombed in plastic, and will hopefully work afterwards.

Monday, December 14, 2009

Xof1 Photo Artifacts: Array build nearly complete

Sometime in 2004, after many weeks the solar array is almost complete. The Xof1 solar array can deliver somewhere around 800 watts. Enough to run a single slice toaster!

Sunday, December 13, 2009

Xof1 Photo Artifacts 6: Array build in progress

In this photo the solar array build is partially complete. The cells are like very thin glass and have to placed precisely on the super sticky taped array surface. Its a one way operation....if the cell is not placed precisely the cell and the tape underneath has to be removed and redone. All together the array required about 900 cells.

Friday, December 11, 2009

Xof1 Photo Artifacts 5: Xof1 model in BCE Place

Long before there was an Xof1 car there was the model of the car. Here is the model displayed in Toronto's BCE Place during the drive to find sponsors. (2004)

Thursday, December 10, 2009

Xof1 Photo Artifacts 4: fitting solar cells

Here are a two strings of solar cells prepared for checking fit and placement on the array. These cells were laser cut into rectangles and then hand soldered together, a very taxing process necessary to maximize array density.

Wednesday, December 9, 2009

Xof1 Photo Artifacts 3: Car with no PV

Here is a pic of the car in mid-2004. The Xof1 car is built from high tech fiberglass and low tech expanded polyurethane. Here the car's array has been taped with a medium tech two sided tape to which the photovoltaic cells will be 'stuck' to the car. This tape was very hard to come by since most of its production was being used in support of the second Gulf War. It was very sticky and provided about 1/16th inch of shock absorbing rubbery material.